Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C

Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Titanium 6Al4V Grades Titanium Alloys Mechanical Chemical Physical Properties Ti 6-2-4-2 Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Ti 15-3-3-3 Titanium 6Al4V IMI 685 Titanium Alloys Mechanical Chemical Physical Properties IMI 829 Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C CP Grade 1 CP Grade 12 CP Grade 2 CP Grade 3 CP Grade 4 CP Grade 7 / 11 / 16 Grade 5 / ELI / 23 Grade 9 / 18 Grade 19 / 20 titanioum , titan, titane, titanio, tianium, titaium, titanim, titaniom, titanium, titanum, titnium, ttanium, t1tan1um, titanium, titamium, titanimu, titanuim, titainum, titnaium, tiatnium, ttianium, ittanium, titaniu, titanim, titanum, titaium, titnium, tianium, ttanium, itanium, titaniom

- about Ti - Introduction Ind. Specification Medical Specification Applications Characteristics Classification Markets Corrosion Engineering Fabrication   - Ti Grades - Introduction Ti 6-2-4-2 Ti 15-3-3-3 Ti 13Nb-13Zr IMI 685 IMI 829 SMA CP Grade 1 CP Grade 12 CP Grade 2 CP Grade 3 CP Grade 4 CP Grade 7 / 11 / 16 6Al4V Grade 5 / 23 6Al7Nb Alloy Grade 9 / 18 Alloy Grade 19 / 20   - Ti Products - Introduction Fine Wire - Cable Foil Sheet / Plate Titanium Targets Tube Oilfield Tubes

» Titanium 15V 3Cr 3Al 3Sn

AMS 4914 - UNS R58153 - USWC 4914 (C)
Alloy 15-3-3-3 Ti is a solid welding wire produced conventionally and then surface cleaned to remove standard drawing lubricants.
This metastable beta Ti alloy is a high strength, heat-treatable material used in aerospace applications.

Ti 15-3-3-3 Foil available min. 0.03mm x 150mm width x coil
mostly in stock 0.6 mm often used in eye frames and other high flexible applications.

This HIGHSTRENGTH, COLDFORMABLE ALLOY is sometimes available as a wire with max. 12 mm diameter. Ti-15V-3Cr-3Sn-3Al is a metastable beta titanium alloy that offers substantial weight reductions over other engineering materials. In the solution treated condition, it has excellent cold formability; in aged condition, it has high strength. 15-3 is a production alloy that is currently used for critical applications on air and space vehicles. 15-3 is usually acceptable for use at temperatures up to 550°F (288°C). Strip is available in gauges from 0.016 in (0.4mm) to 0.094 in (2.4mm). At thinner gauges, 15-3 is less expensive than Ti Grade 5.

Composition Physical Data Mechanical Data Fabrication Information

» Composition

C	< 0.05 %
Fe	< 0.25 %
N2	< 0.05 %
O2	< 0.13 %
H2	< 0.015 %
V	14-16 %
Cr	2.5-3.5 %
Zn	2.5 - 3.5 %
Al	2.5 - 3.5 %
Ti =	Rem

» Physical Data

	Minimum	Typical
Density g/cm3 (lb/cu.in)		4.78(0.173)
Beta Transus °C+/-15°C(°F)		750-770

» Mechanical Data

	Minimum	Typical
Tensile Strength MPa(ksi)	1004 (144)	1045 (146)
0.2% Proof Stress MPa(ksi)	895 (130)	955 (139)
Elongation over 2 Inches %	19	18
Reduction in Area %	42	40
Elastic Modulus GPa(Msi)		82-111

» HEAT TREATMENT

Solution Temperature	1450°F(790°C) air cool equivalent
Solution Time	3-20 min
Aged Temperature	900°F(480°C) - 1150°F(620°C)
Aged Time	4-16 hrs

Titanium Tantalum Molybdenum Niobium Zirconium Tungsten
Tel CH: +41 444 6353 82 Tel DE: +49 7424 9699616
REACH, RoHS compliant - Conflict Free Materials © 1994-2025 Titanex GmbH Switzerland
 

Titanium 6Al4V

Titanium Alloys Mechanical Chemical Physical Properties

Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C

Titanium 6Al4V