Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C

Titanium 6Al4V Titanium Alloys Mechanical Chemical Physical Properties Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Titanium 6Al4V Grades Titanium Alloys Mechanical Chemical Physical Properties Ti 6-2-4-2 Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C Ti 15-3-3-3 Titanium 6Al4V IMI 685 Titanium Alloys Mechanical Chemical Physical Properties IMI 829 Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C CP Grade 1 CP Grade 12 CP Grade 2 CP Grade 3 CP Grade 4 CP Grade 7 / 11 / 16 Grade 5 / ELI / 23 Grade 9 / 18 Grade 19 / 20 titanioum , titan, titane, titanio, tianium, titaium, titanim, titaniom, titanium, titanum, titnium, ttanium, t1tan1um, titanium, titamium, titanimu, titanuim, titainum, titnaium, tiatnium, ttianium, ittanium, titaniu, titanim, titanum, titaium, titnium, tianium, ttanium, itanium, titaniom

- about Ti - Introduction Ind. Specification Medical Specification Applications Characteristics Classification Markets Corrosion Engineering Fabrication   - Ti Grades - Introduction Ti 6-2-4-2 Ti 15-3-3-3 Ti 13Nb-13Zr IMI 685 IMI 829 SMA CP Grade 1 CP Grade 12 CP Grade 2 CP Grade 3 CP Grade 4 CP Grade 7 / 11 / 16 6Al4V Grade 5 / 23 6Al7Nb Alloy Grade 9 / 18 Alloy Grade 19 / 20   - Ti Products - Introduction Fine Wire - Cable Foil Sheet / Plate Titanium Targets Tube Oilfield Tubes

News 7. 7. 10:
Surplus Titanium Sheet Grade 2 ASTM F 67

» Titanium Grade 1

Unalloyed titanium offering optimum ductility and cold formability with useful strength, high-impact toughness, and excellent weldability. Highly corrosion-resistant in oxidizing and mildly reducing environments, including chlorides.

Composition Physical Data Mechanical Data Fabrication Information

» Composition

C	< 0.08 %
Fe	< 0.2 %
N2	< 0.03 %
O2	< 0.18 %
H2 (sheet)	< 0.015 %
H2 (bar)	< 0.0125 %
H2 (billet)	< 0.0100 %
Ti =	Rem

» Physical Data

	Minimum	Typical
Density g/cm3 (lb/cu.in)		4.51(0.162)
Melting Range °C+/-15°C (°F)		1670(3038)
Specific Heat J/g/°C		0.54
Volume Electrical Resistivity µohm (µohm.in)		56(22)
Thermal Conductivity W/mK(Btu/ft h°F)	22(153)
*Mean Thermal Exp. Coeff. 0-100 °C/°C		8.6 x 10 -6
*Mean Thermal Exp. Coeff. 0-300 °C/°C		9.2 x 10 -6
Beta Transus °C+/-15°C(°F)		888 (1630)

» Mechanical Data

	Minimum	Typical
Tensile Strength MPa(ksi)	241 (35)	345 (50)
0.2% Proof Stress MPa(ksi)	172 (25)	221 (32)
Elongation over 2 Inches %	25	37
Reduction in Area %	35
Elastic Modulus GPa(Msi)		103 (15)
Hardness Bhn		120
Specified Bend Radius <0.070" x Thickness		1.5
Specified Bend Radius >0.070In x Thickness		2.0
Welded Bend Radius x Thickness		2.0
Charpy, V-Notch Impact J(ft Ibf)	109 (80)
Charpy, V-Notch Impact J(ft Ibf)		302 (223)
Short Term Creep, 1.0% Strain (1000h @ 250°C) MPa (ksi)		90(13)
Stress Rupture (1000h @ 250°C) MPa		103

» Fabrication Information

Weldability	Excellent
Forging	Rough 871°C (1600°F), finish 788 - 843°C (1450-1550°F)
Annealing	704°C (1300°F), 2 hr, AC
Stress Relief Annealing	482-538°C (900-1000°F), 45 min.

Titanium Tantalum Molybdenum Niobium Zirconium Tungsten
Phone: +41 (0)444 6353 82 Skype: titanexch
© 1994-2010 Titanex GmbH Switzerland powered by euroteam.ch

Titanium 6Al4V

Titanium Alloys Mechanical Chemical Physical Properties

Titanium Grades 1 2 3 4 5 7 9 11 12 19 Beta C

Titanium 6Al4V